QUALITY DESIGNSFREE SHIPPING30-DAY RETURNS
☰ Open Quick Links

Anjolee Safety Locks and Clasps Guide

Safety Locks

TENNIS BRACELETS

Anjolee bracelets are known for their double security locks that ensure they stay securely on your wrist. Each of our lock styles – the Under Clasp and Figure 8 (Side Clasp) – have two security mechanisms that snap firmly into place.

To open and fasten your bracelet, follow the directions below. We recommend asking someone to help you if you need it – it is easier to fasten and open a bracelet lock with assistance.

Watch: How To Use Anjolee's Secure Locks

Using the Under-Clasp Security Feature

To securely fasten the bracelet:

  • 1 Press down on the tab on the side of the under-clasp to open and make sure it is completely loose.
  • 2 Insert the male end/tongue of the lock into the female end until you hear a clicking noise. You should not be able to open the bracelet once you have heard this clicking sound.
  • 3 Secure the under-clasp part by snapping it shut. You will hear another clicking sound.

To open the bracelet:

  • 1 Unhook the under-clasp portion until it is completely open and loose.
  • 2 Apply medium pressure to the push-button on the side of the clasp while gently pulling the two ends of the bracelet lock apart.

Using the Figure 8 / Side-Safety Security Feature

To securely fasten the bracelet:

  • 1 Insert the male-end/tongue of the lock into the female end until you hear a clicking noise. You should not be able to open the bracelet once you have heard this clicking sound.
  • 2 Secure the Figure 8 / Side-Safety clasp by snapping it shut over the knob.

To open the bracelet:

  • 1 Lift the Figure 8/Side-Safety until it unhooks from the knob..
  • 2 Apply medium pressure to the push-button on the side of the clasp while gently pulling the two ends of the bracelet lock apart.

ADJUSTABLE BRACELETS

Our adjustable bracelets feature a chain that enables you to shorten or lengthen it.

Wearing the Bracelet

  • 1 Before wearing the bracelet: Lengthen the chain to maximum by holding the chain with one hand on both areas A (shown at right) and pull the slider with the other hand towards the ends.
  • 2 Slide the bracelet on your wrist.
  • 3 Turn your wrist so your forehand and slider are facing up.
  • 4 Grab both ends using the fingers that are on the same hand as the bracelet.
  • 5 Pull the slider down using the other hand to desired length.
  • 1 Before wearing the bracelet: Lengthen the chain to maximum by holding the chain with one hand on both areas A (shown below) and pull the slider with the other hand towards the ends.
  • 2 Slide the bracelet on your wrist.
  • 3 Turn your wrist so your forehand and slider are facing up.
  • 4 Grab both ends using the fingers that are on the same hand as the bracelet.
  • 5 Pull the slider down using the other hand to desired length.

To Remove the Bracelet

Pull the slider gently towards the ends until you can slide the bracelet off comfortably.